Mighty V3 Waterpipe Adapter | Delta 3D Studios

Designed to fit the Mighty and Crafty+ in place of the cooling unit. This adapter will work with both 14mm and 18mm female bubblers / waterpipes. To use, simply unlock and remove the cooling unit from the device and attach the adapter. Twist adapter to lock into place. 

PLEASE NOTE: Locking threads are made from flexible rubber to ensure no damage/strain on the plastic body of the device while in use. Under extreme strain, the adapter will disengage from the plastic as opposed to stressing it. Dosing Capsules are recommended to ensure no ABV spills in the event your adapter disengages from the threads! For best results, we have found twisting device clockwise while removing from glass ensures the adapter remains connected.

Adapters are safe to clean with any traditional glass cleaning methods including hot water, ISO Alcohol, and PBW. 

BE ADVISED:  Saturating any silicone rubber with ISO Alcohol for extended periods of time will harden the rubber (risking damage to your adapter).  ISO Alcohol may be used for cleaning but please avoid prolonged exposure exceeding one hour.

*WHILE RUBBER IS STIFF, WE RECOMMEND USING TWO HANDS FOR SAFE OPERATION*